Product Description
Mobil DTE FM Series oils are high performance lubricants designed to satisfy a wide range of multi-use equipment requirements for the food processing and packaging industry. These lubricants are qualified as NSF H1 type lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact. The lubricants are tasteless, odourless, premium quality lubricants formulated with non-toxic NSF/FDA food grade additives and base oils. The additive system provides good wear protection, excellent oxidation stability and protection against rust. They provide good system cleanliness, long oil/filter life, and optimum equipment protection. The Mobil DTE FM Series oils are excellent gear, bearing and circulating oils. They are also suitable for handling the critical requirements of hydraulic system components such as close clearance servo-valves and the high accuracy numerically controlled (NC) machine tools. These products meet the most rigorous performance requirements of a wide range of system and component manufacturers using various multi-metallurgy designs allowing a single product with outstanding performance characteristics.
The Mobil DTE FM Series oils have high ratings in the FZG Gear Test demonstrating their excellent protection against wear and scuffing. This allows their use in systems other than hydraulics that may contain gears and bearings. The naturally high viscosity index of the base oils ensures outstanding performance over a wide temperature range.
Features and Benefits
Features |
Advantages and Potential Benefits |
| Non-Toxic Formulation |
Allows use in food packaging and processing applications |
| Very Good Anti-wear Properties |
Reduces wear
Extends equipment life |
| Excellent Oxidation Stability |
Provides long oil and equipment life
Extends filter life |
| High Level Corrosion Protection |
Prevents internal hydraulic system corrosion
Reduces negative effects of moisture in systems
Provides corrosion protection of multi-metallurgy component designs |
| Meets a Wide Range of equipment requirements |
Multi-service applications - One product can replace several
Minimises inventory requirements
Reduced potential for product misapplication |
| Excellent Air Separation Characteristics |
Reduces foaming and it's negative effects |
| Very Good Water Separation Properties |
Protects systems where small quantities of moisture are present
Readily separates larger quantities of water |
Applications
- Suitable for multi-service applications in the lubrication of machinery used in all food processing industries, fish processing and met packing plants
- Excellent gear, bearing, circulating system and hydraulic oils
- Compressors and vacuum pumps handling air and inert gasses
- Air line lubricators
- Systems requiring a high degree of load-carrying capability and anti-wear protection
- Mobil DTE FM 220, 320 and 460 are recommended for freezer plants and for outdoor applications due to their low temperature properties and high temperature stability
- Machines employing a wide range of components using various metallurgy
 Back to Top
Specifications and Approvals
Meets or Exceeds the following industry specifications |
Mobil DTE FM 32 |
Mobil DTE FM 46 |
Mobil DTE FM 68 |
Mobil DTE FM 100 |
Mobil DTE FM 150 |
| FDA 21 CFR 178.3570 |
X |
X |
X |
X |
X |
| NSF H1 |
X |
X |
X |
X |
X |
Meets or Exceeds the following industry specifications |
Mobil DTE FM 220 |
Mobil DTE FM 320 |
Mobil DTE FM 460 |
Mobil DTE FM 680 |
| FDA 21 CFR 178.3570 |
X |
X |
X |
X |
| NSF H1 |
X |
X |
X |
|
Typical Properties
|
Mobil DTE FM 32 |
Mobil DTE FM 46 |
Mobil DTE FM 68 |
Mobil DTE FM 100 |
Mobil DTE FM 150 |
| ISO Grade |
32 |
46 |
68 |
100 |
150 |
| Viscosity, ASTM D 445 |
|
|
|
|
|
| cSt @ 40o C |
31.9 |
45.5 |
68.5 |
96.7 |
155.5 |
| cSt, @ 100o C |
5.5 |
6.8 |
8.7 |
10.9 |
17.0 |
| Viscosity Index, ASTM D 2270 |
106 |
105 |
101 |
97 |
118 |
| Specific Gravity @ 15.6o C/15.6o C, ASTM D 4.52 |
0.862 |
0.868 |
0.873 |
0.878 |
0.869 |
| Copper Strip Corrosion, ASTM D 130 |
1A |
1A |
1A |
1A |
1A |
| Rust Characteristics Proc. A, ASTM D 665 |
Pass |
Pass |
Pass |
Pass |
Pass |
| Pour Point, oC, ASTM D 97 |
-12 |
-9 |
-12 |
-18 |
-12 |
| Flash Point, oC, ASTM D 92 |
212 |
226 |
228 |
246 |
250 |
| FZG, DIN 51354, Fail Stage |
11 |
12+ |
12+ |
12+ |
12+ |
| 4-Ball wear, ASTM D 4172, Scar Dia, 20Kg, 54o C, 1800 rpm, 1 hr, mm |
0.25 |
0.25 |
0.25 |
0.25 |
0.26 |
|
Mobil DTE FM 220 |
Mobil DTE FM 320 |
Mobil DTE FM 460 |
Mobil DTE FM 680 |
| ISO Grade |
220 |
|
|
|
| Viscosity, ASTM D 445 |
|
|
|
|
| cSt @ 40o C |
214.3 |
325.8 |
439.5 |
670.0 |
| cSt @ 100o C |
24.5 |
34.2 |
43.4 |
61.2 |
| Viscosity Index, ASTM D 2270 |
143 |
148 |
152 |
159 |
| Specific Gravity @ 15.6o C/15.6o C, ASTM D 4.52 |
0.854 |
0.852 |
0.852 |
0.853 |
| Copper Strip Corrosion, ASTM D 130 |
1A |
1A |
1A |
1A |
| Rust Characteristics Proc. A, ASTM D 665 |
Pass |
Pass |
Pass |
Pass |
| Pour Point, oC, ASTM D 97 |
-21 |
-30 |
-36 |
-39 |
| Flash Point, oC, ASTM D 92 |
246 |
272 |
284 |
278 |
| FZG, DIN 51354, Fail Stage |
12+ |
12+ |
12+ |
12+ |
| 4-Ball wear, ASTM D 4172, Scar Dia, 20Kg, 54o C, 1800 rpm, 1 hr, mm |
0.25 |
0.25 |
0.30 |
0.30 |
|
